orthogonal table

美 [ɔːˈθɒgənəl ˈteɪbl]

正交表

化学



双语例句

  1. It shows Taguchi L9 ( 34) orthogonal table for scheduling parameters can provide the optimized parameters.
    由分析显示可利用田口L9(34)直交表进行参数的编排,决定出优化的成型加工参数组合。
  2. In each times of orthogonal design, the experimental points which detect the design space are generated according to the orthogonal table around a central point and the range o.
    每一轮正交设计中,探索设计空间的试验点依据正交表围绕一个中心点产生,设计变量的取值范围逐渐减小。
  3. The ranges of experimental conditions are decided by the orthogonal table based on the design of experiment within processing windows.
    用以工艺窗口试验设计为基础的正交表决定工艺条件的范围。
  4. A dominant molecular marker regression model is established, and molecular marker materials expressed in the form of orthogonal table are studied.
    建立了显性分子标记回归模型,并对以正交表形式表现的分子标记资料进行了研究。
  5. In this article, orthogonal test method and orthogonal table are introduced first, then how to use orthogonal test method in analogy calculations is brought forward.
    文章介绍了“正交试验法”及“正交表”,提出了在模拟计算过程中如何使用“正交试验法”。
  6. In this paper a simple method tor establishing the magic square matrix and orthogonal table of singular N order is proposed. The application of proposed method is discussed.
    本文提出了构成N阶魔方方阵的简易方法,介绍了本文方法&整体平移法的实质及奇N阶正交表的建立,讨论了本文方法的实际应用的前景。
  7. A New Method of Numeric Optimization-the Orthogonal Table
    一种新的数值优化方法&正交表法
  8. Application of orthogonal table to threshold scheme
    正交表在门限方案设计中的一种应用
  9. The experiment was designed according to four factors and three levels orthogonal table.
    根据四因素三水平正交表设计试验。
  10. This paper, based on the optimal design of pipeline system, introduced the optimal analysis method of applying orthogonal table and proposed the concept of plans network.
    本文从管网的优化布置和设计着手,详细介绍了运用正交表进行优化分析的方法和技巧,并提出了概化方案网络的概念。
  11. Through a group of test by means of orthogonal table, influence of suction time, suction suspended time and aeration rate on membrane filtration was investigated. An enhanced mechanical-cleaning membrane module M1 and a mechanical-cleaning membrane module M2 were designed in this research.
    试验设计了强化机械清洗膜组件M1和机械清洗膜组件M2,通过正交试验考察了污泥浓度、曝气量、运行膜通量和抽吸时间∶间歇时间对2组膜组件的膜过滤特性的影响。
  12. Based on point to point linearization, it is optimized by the gradient method. Inverse matrix calculation is simplified by the concept of orthogonal test and orthogonal table in this process.
    它基于逐点线性化后按梯度法进行寻优,在线性化及求梯度过程中借用正交试验的概念和正交表的性质,简化了矩阵求逆过程。
  13. The orthogonal design technique which was often used in experimental design is adopted in optimization and a new method of numeric optimization-the Orthogonal Table is proposed.
    本文把在试验设计中经常使用的正交设计技术应用于最优化,提出了一种新的优化方法&正交表法。
  14. The Orthogonal table mixing with the Uniform table was proposed to specify the specimens for neural network, which improved the precision of prediction and decreased the test numbers.
    确定样本的新方法不仅能保证选取的样本具有取点均衡、整齐可比和在整个样本空间内均匀散布等特点,而且提高了神经网络的预测精度,并大大降低了试验次数。
  15. In optimization calculation, the calculating points of functions are planned according to the orthogonal table and the analyses of calculating points are conducted according to the orthogonal design technique in order to search out the optimum solution quickly.
    即在优化计算中,按正交表安排函数计算点,并按正交设计技术进行计算点分析,以尽快地搜索到最优解。
  16. Different mixture proportioning of concrete samples which mixed with different dosages of fly ash and blast-furnace slag are designed through orthogonal table, then the samples 'basic mechanical properties and durability are investigated.
    通过正交表设计了不同掺量的粉煤灰、矿渣混凝土的配比方案,并分别进行了基本力学性能方面和耐久性两方面的试验研究。
  17. The results show: ( 1) By orthogonal table, the new process conditions and solutions of Zn-Ni alloy electroplating coating and Zn-Ni alloy electroplating coating with good appearance and high corrosion resistance has been obtained.
    研究结果表明:(1)利用正交试验方法,获得了电镀Zn-Ni合金涂层的镀液配方和工艺条件,并制备出具有良好外观和耐蚀性的Zn-Ni合金镀层。
  18. This paper talked about the robust design of the flash tube. The combustion performance of ignition powder was studied through the use of dynamic characteristic, the single factor optimization technology and the L9 ( 34) orthogonal table.
    研究了传火管的稳健性设计问题,采用动态特性、单因素优化技术和L9(34)正交表研究点火药剂的燃烧特性;
  19. Using orthogonal continous reflux method and orthogonal table L_9 ( 3~ 4), we investigated the effect of concentration of ethanol extraction times time and amount of solvent to the content of total flavonoids.
    采用正交连续回流法提取,选用正交表L9(3~4),考察不同浓度、提取次数、提取时间和溶剂加倍量对总黄酮含量的影响。
  20. The paper initiates cubic orthogonal and broad optimization design method and the cubic orthogonal tablet on the basis of the plane orthogonal table in order to solve the parameters design of the complex non-linear system of mechanical products.
    针对机械产品复杂非线性系统整机参数设计,提出了立体正交广义优化设计法。在平面正交表基础上提出了具有正交性的立体正交表。
  21. Four, the paper uses the orthogonal table analysis size change of beams and columns, floor and structure length of super-long reinforced concrete framed structure of the temperature stress influence degree. According to these variables application the paper use right software to get the approximate formula.
    再次,利用正交试验表分析梁、柱、板和长度对超长钢筋混凝土框架结构温度应力的影响大小程度,并根据这些变量应用合适的软件得出近似拟合公式。
  22. The notable factors of orthogonal table are analyzed primarily, and some energy-saving measures and tactics are proposed, which to certain extent provides referenced value to exploiture and construction of energy-saving building in Chongqing region.
    对正交分析的能耗显著因素做了重点的分析。最后提出了适合重庆地区的节能措施和策略。这对重庆地区的节能建筑开发和改造有一定的参考价值。
  23. Secondly, the four factors such as the concentration of urea and Ca ( ClO) 2, the temperature of liquid absorption and the concentration of O2 in flue gas were optimized by the orthogonal table.
    其次,对尿素浓度、Ca(ClO)2浓度、吸收液温度和烟气中含氧量四个因素,采用正交表进行优化分析。
  24. By establishing Orthogonal table, these factors were orthogonal optimized.
    通过建立正交表,对这些因素进行了正交设计。
  25. Orthogonal table has how many test, and do how many corresponding facies simulations in petrel.
    正交表有多少次试验,就在petrel里进行多少次相应的相模拟试验。
  26. Do the four parameters with orthogonal test, we can and judge how the various factors affect the speed size according to the range of orthogonal table.
    把这4个参数进行正交试验,可以根据正交表的极差等统计量判断出各个因素对转速的影响大小。
  27. Through theoretical analysis and simulation data, obtain a set of optimal multidimensional structure parameters of the motor through establishment of orthogonal table the orthogonal analysis method can obtain the optimal structure parameters which effectively inhibits the cogging force of the harmonic.
    通过理论分析和仿真数据,获得电机的一组最优的多维结构参数,通过建立正交表,采用正交极差分析方法验证得到的最优结构参数。